Search Constraints
Filtering by:
Campus
Fullerton
Remove constraint Campus: Fullerton
Department
Department of Civil and Environmental Engineering
Remove constraint Department: Department of Civil and Environmental Engineering
1 - 36 of 36
Number of results to display per page
Search Results
- Creator:
- Reina, Paulina
- Description:
- Rubbernecking on freeways is a common problem that arises when queuing traffic develops in the opposite direction of a freeway incident. The goals of this study are to evaluate the effects of rubbernecking on traffic, investigate incident and freeway characteristics associated with it, evaluate rubbernecking models, and analyze drivers’ behavior in relationship to rubbernecking. To this end, traffic data around a major incident were analyzed. Results revealed that rubbernecking can instigate significant queue lengths, congestion durations, and traffic delays. In addition, analysis of 637 incidents revealed that 12% of incidents instigated rubbernecking queues. A logistic regression model was also fitted to the data. Results from the model suggest that on-ramps, high-occupancy vehicle (HOV) lanes, and percent of trucks are factors associated with rubbernecking. In addition, validation analyses of rubbernecking models pointed to limitations of estimated statistical models in effectively predicting rubbernecking events. Furthermore, results from a drivers’ behavior self-reporting survey suggest that a majority of drivers tend to decrease their speed around an incident in the opposite direction of traffic. It was also observed that respondents attributed these actions to habits and behavior more frequently than incident and freeway characteristics. Findings from this work can be used to help develop targeted rubbernecking traffic control measures, enhance rubbernecking data collection methods and modeling, and advance behavioral interventions to reduce the onset of rubbernecking queues on freeways.
- Resource Type:
- Article
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering
- Creator:
- Kurwadkar, Sudarshan
- Description:
- Ingestion of polycyclic aromatic hydrocarbons (PAHs) contaminated water has potential human-health and ecological consequences. A comprehensive investigation of PAHs' occurrence and distribution in the surface water and sediment samples of the Damodar River Basin was conducted using the Agilent 7890B Gas Chromatograph (GC-FID) coupled with 5977A Mass Spectrometry. The results showed that concentrations of the individual PAHs in surface water and sediments ranged from ND to 36 μg/L and ND to 582 ng/g with the highest detected levels of 3-ring PAH Acenapthylene (ACY) and 4-ring PAH Benzo(a)Anthracene (BaA) with a mean concentration of 6.12 ± 6.06 μg/L and 2.79 ± 4.5 μg/L, respectively. The concentration of 4-ring PAHs such as Fluoranthene (Flur), Pyrene (Pye), Benzo(a)Anthracene (BaA), and Chrysene (Chry) in sediment samples has mean levels of 43 ± 41 ng/g, 32 ± 29 ng/g, 52 ± 50 ng/g, and 83 ± 105 ng/g, respectively. The 4-ring PAH Chry was frequently detected in all sediment samples, while the 3-ring PAH ACY was dominant in surface water samples. The principal component analysis (PCA) and diagnostic ratios suggested that the PAHs contamination in surface water was due to petrogenic and fuel combustion. In sediments, PAHs' primary sources were coal burning, fuel combustion, petrogenic, and pyrolysis. The incremental lifetime cancer risk (ILCR) for children and adults due to ingestion of surface water ranged from ND to 4.25 × 10−5 and ND to 7.21 × 10−5, respectively. In contrast, the Risk index (RI) values ranged from 4.3 × 10−5 and 7.3 × 10−5. For sediment samples, higher toxic equivalent quotient (TEQ = 1865 ng/kg) and mutagenic equivalent quotient (MEQ = 1665 ng/kg) for eight carcinogenic PAHs indicate extremely high toxicity. Improper management of mine drainage, frequent flooding of open cast mines, and hydraulic connection between the surface water, sediments, and groundwater significantly deteriorated overall water quality in the DRB.
- Resource Type:
- Article
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering
- Creator:
- Koirala, Janak Das
- Description:
- Every year, millions of scrap tires are either discarded in huge piles across the landscape or dumped in landfills in large volumes all over the world. These tire piles cause environmental pollution while posing fire and health hazards. Being volumetric goods in comparison to other wastes, they occupy large volumes in landfills. Rainwater tends to accumulate in the stockpiled tires, which, then become a breeding ground for mosquitoes that carry dangerous diseases, such as encephalitis. Several states in the United States have, therefore, banned the disposal of used tires in the land. Shredded rubber has been used in a variety of applications in geotechnical engineering including in highway pavements and backfills of retaining walls, but mostly as individual material. In this study, kaolinite and montmorillonite were modified using different sizes and quantities of shredded rubber tires and used to evaluate the improvement in geotechnical properties. Five different sizes and five different proportions of shredded rubber tires were mixed with the clay minerals. Laboratory experiments were carried out to evaluate the changes in density, permeability and unconfined compressive strength of such modified soil with shredded tires. The results showed that for kaolinite, the maximum dry density decreased as the percentage of shredded rubber tire in the mixture was greater than 4% by dry weight. In Montmorillonite, the maximum dry density of the modified soil increased till 2 to 4% of shredded rubber tire was added to the soil. The highest strength was observed at 4% shredded rubber tire content in kaolinite and at 5% shredded rubber tire content in montmorillonite. Permeability increased when smaller sized shredded rubber tire was added to kaolinite. In montmorillonite, permeability values sharply increased up to 2% shredded rubber tire content and thereafter, showed a linear increase in permeability for all sizes of shredded rubber tire used. From this study, it is concluded that shredded rubber can be effectively used to improve the compaction and strength characteristics of weak soils.
- Resource Type:
- Masters Thesis
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering
- Creator:
- Pantha, Krishna Hari
- Description:
- This paper presents the results of a study, whose aim was to determine the undrained shear strength at different over-consolidation ratios, which is a very important parameter to evaluate the stability of natural and man-made slopes in soft clay. The undrained shear strength of clays was determined using a laboratory test method utilizing the Direct Simple Shear (DSS) apparatus in the geotechnical engineering laboratory at California State University, Fullerton. In this study, the change in undrained shear strength of soil with over-consolidation ratio in a mineralogical framework was studied. Four different soil samples were prepared by mixing commercially available clay minerals such as kaolinite and montmorillonite with quartz at different proportions by their dry weight. These samples included 100% kaolinite, a mixture of 70% kaolinite with 30% quartz, a mixture of 50% kaolinite with 50% quartz and a mixture of 50% montmorillonite with 50% quartz. The plasticity characteristics of these samples were evaluated. Each of the first three samples had five different specimens representing five different over-consolidation ratios (2, 4, 8, 16 and 32). The fourth sample had only two specimens for two different over-consolidation ratios, i.e. 2 and 4. The applied consolidation stresses were 600 kPa, 300 kPa, 150 kPa, 75 kPa and 37.5 kPa for five different over-consolidation ratios of 2, 4, 8, 16 and 32, respectively. Using the direct simple shear device, the undrained shear strength of these samples were measured using a strain rate of 5%/hour. The pore pressures generated at different applied stresses was also back calculated from the change in total stresses. The pore water pressure continuously increased up to certain displacement and then after tended to remain constant. The results showed that it was inversely proportional to the over-consolidation ratio. Using the results, the SHANSEP model and Hvorslev’s theory were utilized to check normalized shear strength, and true friction angle and true cohesion of each soil sample, respectively. The result showed that the shear strength depends up on the composition of clay minerals and stress history of the soil. The relationship of the normalized undrained shear strength ratio was directly proportional to the overconsolidation ratio of the soil. Similarly, the true friction angle of the soil depended up on the composition of the clay minerals, but not on the stress history. True friction angles of 19.28°, 20.63°, 21.06° and 35.24° were obtained for Sample Nos.1, 2, 3 and 4, respectively; whereas, the true cohesion of these sample were measured as 8.46°, 7.21°, 4.55° and 0.39° respectively.
- Resource Type:
- Masters Thesis
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering
- Creator:
- Woli, Hari
- Description:
- Global warming is a big concern these days all over the world including in the USA. It has said to trigger landslides all over the world every year due to the global warming. Landslides can damage the structures and block roads and rivers that require much effort and finances to repair. On 11 March 2011, an earthquake with magnitude 9.0 (Mw) occurred in Tohoku, Japan. Approximately 15,893 people were killed, 6,152 people were injured and much of the infrastructure was damaged. Hundreds of landslides occurred at that time. Recently, an earthquake with magnitude 7.8 occurred on 25 April 2015 in Gorkha, Nepal, west of the capital Kathmandu. A major aftershock with magnitude 7.3 occurred on 12 May 2015 near Kodari, east of Kathmandu. As a result of both of these major earthquakes, more than 9000 people were killed and thousands of landslides occurred in various parts of the country. Both earthquakes occurred in the dry season, and hence, a major concern was the increased likelihood of landslides in the rainy season following these earthquakes. This research describes the effect of post-earthquake rainfall on slope stability by examining the landslide distribution pattern in Nepal, following the 2015 Gorkha Earthquake and its aftershocks. A high resolution Google Map was used to locate the landslides triggered in the eastern to mid-western part of Nepal following the earthquake and after the first rainy season. A landslide database was created and contains the angle of inclination, features at risk and landslide area for each landslide identified. To evaluate the stability of slopes following a post-earthquake rainfall event, a 45º slope was modelled in a Plexiglas container and subjected to shaking on a shake table and rainfall in the laboratory. A clayey soil obtained from Mission Viejo, CA was used to prepare a slope model with void ratio 1.2. The slope was instrumented with accelerometers, tensiometers, and copper wires to record acceleration, pore water pressure and deformation of the slope, respectively. A series of sinusoidal waves with 20 cycles at various amplitudes and frequencies (0.1 g, 0.2 g, 0.3 g and 1 Hz, 2 Hz, 3 Hz) were applied to the slope model. After the seismic loading was applied, a rainfall simulator was placed on top of the slope and used to apply rainfall with an intensity of 16.8 mm/hr. The water front from the infiltrating rainwater was marked on either side of the Plexiglas container at different time intervals. Slope instability was not observed during the post-earthquake rainfall event. This was attributed to a decrease in the void ratio due to the seismic shaking leading to a reduction in the seepage rate for the rain water and lower pore pressures on the slope. Hence, the likelihood of further slope instability in the rainy season following an earthquake decreases. The results were verified in the case study from Nepal as there were no reported landslides during the rainy season immediately following the 2015 Gorkha Earthquake and its aftershocks.
- Resource Type:
- Masters Thesis
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering
- Creator:
- Khanal, Prakash Chandra
- Description:
- Based on previous studies, ground reinforcement methods such as stone columns, jet grouting, dynamic compaction, soil cement mixing, etc. are commonly used against potential liquefaction, settlement and to improve the bearing capacity of soil. However, additional benefits of ground improvement such as the possible reduction in seismic ground shaking are not usually considered in the practice or in the current International Building Code (IBC). As seismic damage is a major concern, soil-cement mixing was found to be the most effective in reducing of ground shaking levels. Among soil-cement mixing, compacted soil-cement panels have been considered as one among the most effective improvement techniques for seismic remediation. Past research shows that replacement of a portion of soil up to certain depth using compacted soil-cement mixture works effectively in improving soft clays and loose dry sand. However, field compaction effort requires some preparation and additional cost. The present study compares the results obtained through deep soil mixing panels with the results obtained with compacted clay based soil-cement panel. The compacted soil-cement panels and deep soil mixing panels corresponding to replacement ratios of 10% and 20% were prepared and cured for 14 days. A series of small-scale shake table tests were performed using models with unimproved and improved soil with reinforcement panels at different seismic shaking levels. The research results show that compacted soil-cement panels are more effective in reducing seismic amplification than deep soil mixing panels. The compacted soil cement panels could reduce the seismic amplification by 12% and 25%, whereas the reduction for deep soil mixing panels was 9% and 15% for the replacement ratios of 10% and 20%, respectively.
- Resource Type:
- Masters Thesis
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering
- Creator:
- Avina, Jose L.
- Description:
- Infiltration is an important aspect to the hydrologic cycle as it allows for groundwater recharge. In California especially, groundwater is used for agriculture, industrial usage, and as drinking water. This Thesis presents an analytical model for time dependent infiltration through a variably saturated soil. Water is considered to begin infiltrating soil at the ground surface and moves through the vadose zone towards the datum of the system (the water table) where pressure head is constrained to zero. The developed model calculates important soil characteristic parameters such as hydraulic conductivity, K, water content, θ, and pressure head, ψ, as a function of depth. The solution introduces four parameters (ak,ψk,ac, and ψa) to represent K and θ as exponential functions. The proposed model is then compared to existing exponential function solutions for various times. The comparison illustrates the versatility of using a four parameter exponential representation for infiltration. Furthermore, the proposed solution is validated against the numerical solution of HYDRUS-1D, which employs the widely used van Genuchten-Mualem constitutive model. Additionally, once parameters ak and ψk are known, one can obtain van Genuchten parameters α and n. Finally, the constitutive exponential expressions for hydraulic conductivity and water content are compared to the van Genuchten-Mualem expressions.
- Resource Type:
- Masters Thesis
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering
- Creator:
- Tran, Duc Tan
- Description:
- Landslides, which have been existing around the world, are considered as environmental hazards. The number of landslide hazard is increasing every year. Although there are different causes of landslides, two major causes are rainfall and earthquake. Rainfall increases pore water pressure, changes the degree of saturation and causes a loss of strength in the soil. Therefore, the equilibrium can no longer be maintained in the slope, and a failure occurs. Likewise, when an earthquake occurs, the seismic force associated with the earthquake triggers mass movement such as rock fall, debris flow, and others forms of mass movement. In an attempt to evaluate the effect of rainfall in triggering landslides, a series of physical slope models were prepared in laboratory at different soil void ratios, and slope inclinations. Slope stability and deformation analyses were carried out in order to not only further understand the effect of rainfall on slope stability, but also obtain a relationship between void ratio, intensity and duration of rainfall, and slope inclination on soil slope stability. Collected soil samples from a compacted fill area in Mission Viejo, CA were placed into the Plexiglas container and compacted to the desired void ratios to form physical models at the inclinations of 40 and 45 degrees to introduce targeted rainfall with a rain simulation system in order to measure the seepage rate, moisture content, degree of saturation and surface erosion with time. After these static slope experiments, another experimental model was prepared and shaken on the shake table to determine the relationship between void ratio, seismic acceleration, seepage velocity and slope stability. The soil sample was placed into the same Plexiglas container and compacted to a void ratio of 1.2 to form the same 60 cm thick model, which was later cut into a 40 degree slope. Accelerometers were then placed on the slope to measure the amplification of seismic acceleration at different depths during shaking. Tensiometers were also installed on the slope at different locations to measure the variation of pore water pressure with time. The slope was shaken with different accelerations and frequencies for multiple cycles. Rainfall stimulator device was then placed on the top of the slope immediately after the shaking event. The targeted rainfall was introduced to evaluate the stability of the slope after shaking event. The results were used to perform slope stability and finite element analyses in Geo-Studio 2012- Slope/W, Seep/W, Sigma/W and Quake/W. Overall, the results of static slope stability modeling showed that pore water pressure and the velocity of wetting front of the slope do not increase uniformly over the entire slope during the rainfall period. Time required to saturate the soil decreases with an increase in the void ratio for the same intensity of rainfall. The velocity of movement of wetting front decreased for the slopes prepared at larger angle of inclination compared to the one prepared at smaller angle of inclination when subjected to same intensity and duration of rainfall. The values of factor of safety of the slope for the same intensity and duration of rainfall dropped with an increase in void ratio. In addition, a slope having smaller angle of inclination is more stable than the one having lager angle of inclination for same void ratio, and intensity and duration of rainfall. The results of seismic slope stability analysis subjected to post-seismic rainfall event showed that there was no significant change in pore water pressure during shaking and no catastrophic failure occurred during post-shaking rainfall event. The velocity of movement of wetting front decreased for the post-shaking rainfallinduced slopes compared to the static condition. Besides, the slope subjected to rainfall without shaking event exhibited 10% lower factor of safety compared to the slope subjected to post-seismic rainfall event. The deformation obtained from numerical analysis for both of static and seismic slopes were larger than that obtained from the laboratory experiments. Moreover, the numerical analyses for the case study matched well for the results obtained from the laboratory experiments.
- Resource Type:
- Masters Thesis
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering
- Creator:
- Ahj Obaid, Zahraa Tawfeeq
- Description:
- Large amounts of waste materials such as waste tires, rubbers, etc. are discarded into our surrounding environment. Thus, they are a major cause of contamination and pollution, which, as a result, could eventually lead to many problems including health hazards and fire. Therefore, engineers, environment scientists and researchers face a challenge of how to deal with discarded tires. Undoubtedly, the best solution to not only get rid of waste tires but also make use of them through recycling. Thus, recycling tires would ultimately yield a cleaner environment and prevent public health degradation. Moreover, shredded tires have been used in many geotechnical as well civil engineering applications such as highway embankments, bridge abutments and backfills behind retaining structures. Shredded tire material has also been used to modify soils. Certain clay properties such as poor drainage, high compressibility, and low shear strength make it unfavorable for civil engineering applications. Modifications can be made in these properties by mixing clay with shredded tires. This study focuses on improvements obtained in clay properties by using different sizes of shredded rubber tire. Granular kaolin and a mixture of 50% montmorillonite with 50% granular kaolin were modified using different sizes and percentage of shredded rubber tire. Laboratory experiments were carried out to evaluate the changes in unit weight, permeability and unconfined compressive strength characteristics of the modified clay. The results presented in this thesis include the properties of granular kaolin and a mixture of 50% montmorillonite with 50% granular kaolin mixed with shredded rubber tires. According to the test results, the maximum dry unit weight occurs at 2 to 4% of shredded rubber tires are added to the clay soil samples for all sizes of shredded rubber tire. The highest strength for the mixture of granular kaolin and tire was obtained at when 3 to 4% shredded rubber tire was added into the soil. The maximum unconfined compressive strength for a mixture of 50% montmorillonite with 50% granular kaolin was obtained at approximately 4% shredded rubber tire for all sizes. Moreover, when less than 10% shredded rubber tire was added to granular kaolin, little changes in the coefficient of permeability were observed. When more than 10% shredded rubber tire was added, the coefficient of permeability increased as the percentage of shredded rubber added increased.
- Resource Type:
- Masters Thesis
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering
- Creator:
- Nassruldin, Lafa Taher
- Description:
- Soil is unlike other construction materials such as steel and concrete for which humans can control their properties. Therefore, it is important to investigate and test soil in order to predict its response to the construction loading. The coefficient of consolidation (Cv) and coefficient of permeability (k) are two of the dominant and fundamental geotechnical parameters that are used in many applications within the civil engineering discipline. These coefficients are used in dam construction on soft bedrock, erection of retaining walls in weak bearing soil and foundation design on poorly compaction soil. In this study, four types of minerals montmorillonite, kaolinite, illite and quartz were mixed in different proportions, and used to conduct one- dimensional consolidation tests, as summarized in Tiwari and Ajmera (2011). Seven different vertical pressures 3.47 psi, 6.94 psi, 13.89 psi, 27.78 psi, 55.56 psi, 111.11 psi and 222.22 psi were applied. In order to examine the influence of pore fluid chemistry, the soil samples were prepared with distilled water as well as with saline water as the pore fluid. Casagrande’s Logarithm of Time Method were used to estimate the coefficient of consolidation values for forty – two samples with distilled water as the pore fluid and twenty – four samples with saline water as the pore fluid. Also, Terzaghi’s equation was used to determine the coefficient of permeability for the mineral mixtures. The variations of the Cv and k with consolidation pressure and index properties for all mixtures with distilled water and saline water as the pore fluids were examined. It is observed that Cv for kaolinite and illite mixtures with distilled water and saline water as the pore fluids increases with an increase in the consolidation pressure. On the other hand, Cv values for the montmorillonite mixtures with distilled water as the pore fluid decrease with an increase in the consolidation pressure. The Cv values for the montmorillonite mixtures with saline water as the pore fluid increase with an increase in the consolidation pressure. All the soil mixtures with distilled water and saline water as the pore fluids experienced reduction in the values of the coefficient of permeability with the increase in the consolidation pressure. The coefficient of consolidation decreases with an increase in the liquid limit for the kaolinite, illite and montmorillonite mixtures with distilled water and saline water as the pore fluids. The relationship between the coefficient of consolidation and plasticity index for the mineral mixtures with distilled water and saline water as the pore fluids has the same trend as that with the liquid limit. Specifically, the coefficient of permeability decreases with an increase in the liquid limit and plasticity index for the kaolinite mixtures with distilled water and saline water as the pore fluids. Finally, the coefficient of permeability decreases with an increase in the liquid limit and plasticity index for the montmorillonite mixtures with distilled water and saline water as the pore fluids.
- Resource Type:
- Masters Thesis
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering
- Creator:
- Mozaffarpour Noori, Mohammad
- Description:
- The aim of this thesis is to provide a tool for contractors to select optimal equipment for projects, which will increase cost efficiency and reduce environmental impacts. The target geographic area for this research is the state of California, and the considered type of machinery is heavy construction equipment. In part, this research presents a modified mathematical model, as a decision-making tool, to minimize cost and emission of construction equipment, while meeting project requirements. The optimization model facilitates construction companies in selecting more efficient and sustainable equipment, while also avoiding penalties associated with non-compliance with the state’s environmental regulations. Such approach may lead to more profit by increasing the number of projects due to growing public sentiment towards environmentally friendly businesses. This model uses particular types of fleet data and project data. Construction equipment related data includes fleet size, equipment type, number, model, and year. Project related data includes project’s volumes, schedule, resources, and technical issues described by the contractors. Once this information was collected from equipment rental agencies throughout different geographic locations in California, a spreadsheet incorporated this information, along with mathematical calculations for estimated emissions, as well as the capacity for each type of equipment.
- Resource Type:
- Masters Thesis
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering
- Creator:
- Salamanca, Jenny
- Description:
- This study focuses on the analysis of rainwater runoff from an extensive green roof system. Over time, space that was formally available for rainwater to properly infiltrate to the ground is being taken up by impervious built surfaces. Green roof technologies could be very beneficial in urban development, therefore the evaluation of the runoff quality is necessary to know if green roof systems act as a source of pollutants to receiving water bodies, or if they help mitigate contaminants that are washed off from the atmosphere and transfer to water bodies during rain events. The performance of green roof systems is highly dependent upon the season, temperature, wind condition, humidity, duration, and intensity of rainfall. The design of the green roof also plays an important part in the performance of the green roof, for which, material type, soil thickness, and maintenance influence the runoff quality. The green roof was analyzed for nutrients concentrations, pH, and conductivity of rainwater runoff. It was found that the green roof’s runoff had concentrations of nitrate, phosphate, and chloride ions. To investigate the amount of nutrients found in rainwater collected from different types of roofs, the green roof’s runoff nutrient concentrations were compared to those of a shingled roof. The pH and electrical conductivity of the rainwater runoff of the green roof were compared to those measured on a shingled roof as well.
- Resource Type:
- Masters Thesis
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering
- Creator:
- Ul Quraish, Shahzan
- Description:
- Performance Based Design (PBD) using nonlinear analysis techniques is a well– established method to evaluate the seismic performance of RC coupled wall structural systems and their associated components like coupling beams. In principle, it is crucial to precisely define component behavior (Force–Deformation relation) for an exact evaluation of the global performance of the system. However, it is noticed that at present extensive information is not available for this purpose. ASCE 41 provides nonlinear modeling parameters and numerical acceptance criteria for components but this information is inadequate specifically for Diagonally Reinforced Coupling (DRC) beams. Moreover, vital effects of many key factors are not taken into account in ASCE 41 recommendations for Force–Deformation behavior of the DRC beam. In view of above, this study was intended to evaluate the impact of various key factors on nonlinear behavior of DRC beam at first and eventually to estimate nonlinear modeling parameters with practical considerations of the vital effects of these key factors. Specifically, these key factors were aspect ratio, shear stress levels, confinement, and compressive strength of concrete. The definitive goal of the study was to advocate a reasonable framework for ASCE 41 to incorporate the key factors in the recommendations for DRC beam. However, this study does not warrant the accuracy, content, completeness or suitability of the information provided in the proposed framework.
- Resource Type:
- Masters Thesis
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering
- Creator:
- Kadhim, Ahmed Kamil
- Description:
- Lightweight concrete has been used in construction because of its properties, such as thermal, and fire resistances although it is more expensive and less available than normal weight concrete. One way to save time, cost, and to provide an alternative to lightweight concrete in construction projects is to reduce the number of installed insulations on precast wall panels and to improve the properties of normal weight concrete panels, respectively. These goals can be achieved by improving the four properties of precast panels, such as thermal resistance, fire resistance, heat capacity, and sound insulation by using perlite as insulation. The main goals of this research are getting buildings constructed or modified in less time and cost by producing superior wall panels and improving the properties of normal weight panels. Superior wall panels are new panels that provide the four properties listed above. Precast panels with different cross sections, concrete type, and different amounts of perlite will be investigated to observe the impact of each factor on the mentioned properties. The cost of each panel will be studied, and analytical methods will be used to find the optimum panel that provides the four mentioned properties with least cost. Moreover, theoretical methods will be applied to calculate the four properties for each panel.
- Resource Type:
- Masters Thesis
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering
- Creator:
- Al Quraishi, Murtdha Hashim Hassoon
- Description:
- Improving the engineering properties of soil through soil modification has been implemented in practice for a number of years. However, construction over soft soil sites has remained a major challenge for projects all over the world because the ground shaking amplifies as it travels through soft soils and will result in an increase in the pseudospectral acceleration. Design of infrastructure depends on the seismic shaking levels from an earthquake. If the amplification of the ground motions can be reduced, the design of the infrastructure can be more economical. For this research, a laminar box was constructed, fitted with a drainage system and filled with a soft clay soil. The laminar box can freely deform during shaking tests and is more representative of free-field conditions. However, previous studies were performed using a rigid box. After the soft clay was consolidated to a pressure of the effective vertical pressure of 10 kPa, accelerometers were installed into the soft clay and a series of unidirectional 1-G shake table tests were conducted with different seismic shaking levels on both models with unimproved and improved soil profiles using deep soil mixed soil–cement panels. The improved deep soil mixed soil–cement panels were constructed at 10% and 20% replacement ratios (RR), which is defined as the ratio of the plan area of the soil-cement to the plan area of the soft clay profile. The present research shows that the deep soil mixed soil–cement panels effectively reduced the pseudospectral accelerations of ground shaking with the installation of panels having both the 10 % RR and 20% RR. On average, a reduction in pseudospectral acceleration was observed to be about 63% for 10 % RR and 59% for 20% RR.
- Resource Type:
- Masters Thesis
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering
- Creator:
- Sakban, Haider Kadhem
- Description:
- Reinforced concrete (RC) walls are the most commonly used structural elements in buildings for resisting lateral forces induced by earthquakes. Therefore, reliable and robust analytical models that can predict their behavior under earthquake actions are essential for the design of new buildings and evaluation of existing buildings. Performance-Base Seismic Design (PBSD) and evaluation currently of RC structural walls typically relies on analytical models that do not capture the interaction between shear and flexural responses. Previous experimental and analytical studies showed that this interaction could be important for walls with shear span ratio ranges between 1.5 and 3.0 and that models which do not capture this interaction can overestimate wall strength and stiffness by 30 to 50%. A novel modeling approach that captures shear-flexure interaction (SFI) has been recently developed and implemented in computational platform OpenSees. The model has been previously validated against five RC wall specimens with aspect ratios of 1.5 and 2.0 that experienced significant SFI, and it showed to be capable of reproducing successfully experimentally measured global and local wall responses. However, the model has not been validated extensively over a wide range of wall characteristics, aspect ratio, axial load, reinforcement configuration and shape of the cross-section.The objective of this study is to calibrate and validate the SFI modeling approach recently implemented in computational platform OpenSees against a great number of specimens to assess its capability of successfully reproducing experimentally measured wall responses over a range of wall characteristics. The model was validated against 12 RC wall specimens tested under cyclic loading conditions. Comparison of experimental and analytical wall behavior focused on the overall load versus total top wall displacement and load versus shear displacement (global response) over the plastic hinge region (local response). Based on the results presented, it can be concluded that the model is capable of reproducing successfully experimentally measured wall behavior over a range of considered wall characteristics, including lateral load, stiffness, stiffness degradation and shear displacement within plastic hinge. It has also been observed that the model tends to overestimate the area of the hysteretic loops (i.e., underestimate pinching) for specimens with zero axial load, due to currently implemented models that represent shear transfer mechanisms along concrete cracks. Based on the results presented, future model improvements are suggested. The objective of this study is to calibrate and validate the SFI modeling approach recently implemented in computational platform OpenSees against a great number of specimens to assess its capability of successfully reproducing experimentally measured wall responses over a range of wall characteristics. The model was validated against 12 RC wall specimens tested under cyclic loading conditions. Comparison of experimental and analytical wall behavior focused on the overall load versus total top wall displacement and load versus shear displacement (global response) over the plastic hinge region (local response). Based on results presented, it can be concluded that the model is capable of reproducing successfully experimentally measured wall behavior over a range of considered wall characteristics, including lateral load, stiffness, stiffness degradation and shear displacement within plastic hinge. It has also been observed that the model tends to overestimate area of the hysteretic loops (i.e., underestimate pinching) for specimens with zero axial load, due to currently implemented models that represent shear transfer mechanisms along concrete cracks. Based on results presented, future model improvements are suggested.
- Resource Type:
- Masters Thesis
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering
- Creator:
- Shin, Jean
- Description:
- Reinforced concrete (RC) structural walls are the most commonly used structural elements in buildings to resist earthquake loading. Concrete crushing in wall boundaries followed by buckling of longitudinal reinforcement is one of the most common failure mode of flexure-dominated RC walls. Deformation capacity of a RC wall is influenced by detailing of the wall boundary reinforcement, particularly requirements related to buckling of reinforcing bars. Thus, it is important to understand the buckling behavior of wall reinforcement and to be able to predict the behavior with robust analytical models. The main objective of the research is to conduct systematic calibration and validation studies on existing modeling approach to assess current modeling capabilities and propose future improvements. Analytical studies are performed using a computational platform, and the models are validated against experimental results obtained from tests on single reinforcing bars, RC wall boundary elements and RC wall that experienced buckling failure. Based on the results presented, it has been concluded that current models are capable of capturing buckling of reinforcing bars and RC boundary elements at a local (strain-stress behavior) level. However, for the RC wall considered in this study, although the model predicts stress drop in the wall boundary reinforcement, the model had not predicted reduction of overall deformation capacity of the wall. Based on these observations, model improvements and future research directions are proposed.
- Resource Type:
- Masters Thesis
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering
- Creator:
- Ostorva, Florentino
- Description:
- According to a research conducted by Durham University, UK, landslides kill approximately ten times more people around the world than was formerly believed. Landslides are recurrently perceived in coastal areas where the water has high salinity. It is vital for researchers to appraise the influence of sodium chloride (NaCl) on fully softened shear strength (FSSS) of clays to understand the causes of landslides in coastal areas. for this study, seven clay mineral mixtures were prepared in the laboratory and tested using a fully automated direct simple shear (DSS) device to adjudicate the FSSS when saline water is the pore fluid under drained and undrained conditions. the results were used to examine the influence of the presence of NaCl in the pore fluid on the shear strength parameters. in addition, the curvature in the shear envelope for these samples was quantified and correlated with the corresponding plasticity indices. in general, the shear strength of samples when saline water was the pore fluid is greater than the shear strength of samples when distilled water was the pore fluid. a reduction of NaCl concentration in the pore fluid results in a reduction of FSSS. the variation in the FSSS due to pore fluid salinity in kaolinite-quartz samples is less than that observed in the samples prepared as montmorillonite-quartz mixtures. It is clear from this study that the influence of the pore fluid chemistry on the FSSS is directly correlated to the influence of the pore fluid chemistry on the plasticity characteristics of the clayey soil mixtures.
- Resource Type:
- Masters Thesis
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering
- Creator:
- Yamashiro, Brian
- Description:
- Liquefaction and cyclic mobility are two major modes of ground failure that occur due to earthquake loads. Cyclic mobility is initiated due to a reduction in shear strength of the soil. to evaluate the likelihood of occurrence of such failures, it is important to understand the shear strengths of soil before and after earthquake loading. for this study, samples were collected from the Kathmandu Valley in Nepal after the 2015 Mw 7.8 Gorkha earthquake from an area that experienced failure. Three additional soil samples from the Portuguese Bend area, California, a known area for landslides, were also evaluated during this study. Testing included static shear testing and cyclic loading followed by post-cyclic shear testing to determine the strength degradation that occurs post-cyclically and other cyclic properties of the samples. Results from this study show indications of increased cyclic resistance corresponding to increased plasticity index and lower consolidation stresses, power function representation of cyclic strength curves as identified in previous studies, a reduction in post-cyclic shear strength degradation with an increase in plasticity index, and greater retention of relative stiffness in montmorillonite dominated soil compared to kaolinite dominated soil during cyclic loading. Slight deviations from the predicted trends were observed for a few natural samples, which could potentially be due to their marine environment during formation process or the variable clay minerology found in these natural soils.
- Resource Type:
- Masters Thesis
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering
- Creator:
- Mann, Michael Ford
- Description:
- One of the many problems that engineers face is protecting structures from the disastrous effects of earthquakes, especially at soft soil sites. Soft soils are known to amplify the shaking during an earthquake resulting in higher accelerations at the ground surface, which can be more damaging for the overlaying buildings. in previous studies and in case histories, the use of ground reinforcement has shown positive results in mitigation against liquefaction and ground deformation during earthquakes, but little research was done to experimentally investigate the effectiveness of ground reinforcement in reducing ground motions. in this study, a method of reducing seismic shaking has been studied, which used ground improvement with soil reinforcement panels in the form of deep-soil mixed and soil-cement panels to strengthen a soft soil profile in both a rigid and laminar container. After filtering and comparing the data, comparisons were made in order to analyze the reduction in acceleration during the tests using differing sizes of soil reinforcement panels and the performance of the laminar and rigid containers. in summary, the deep-soil mixed, DSM, panels were more effective at 10% replacement ratios than at 20% replacement ratios at the surface of the clay, reducing the amplification in the clay by as much as 54% at 10% replacement ratio. in addition, the results from using a laminar container were not substantially different than the tests using a rigid container, showing a minimal boundary effect in the middle of the soil sample’s surface.
- Resource Type:
- Masters Thesis
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering
- Creator:
- Jamal, Jasmin
- Description:
- In collaboration with the Orange County Water District (OCWD) Research and Development Department, water quality of advanced treated recycled water was studied before and after transit from its origin at an Advanced Water Purification Facility (AWPF) to surface-spreading Managed Aquifer Recharge (MAR) basins, through an approximately 14-mile pipeline. the study was conducted in two parts related to MAR water quality: first, to analyze the effects of decreased water quality associated with pipeline transit on percolation decline (clogging) at Miraloma Basin and second, to measure the formation and destruction of N-Nitrosodimethylamine (NDMA) in the pipeline and La Palma Basin. NDMA is not a clogging agent, but rather a trace-concentration organic compound of public health concern. the percolation decline analysis was conducted through a constant-head column study which required advances in Standard Operating Procedures (SOP) to conduct a reproducible experiment. the NDMA study was conducted by comparing NDMA in product water at GWRS, after travel through pipeline, in the recharge basin, and in the groundwater. Conclusions drawn from this research confirm the hypothesized decline of water quality during pipeline transit, which increases the water’s clogging potential and allows time for NDMA formation. This research provides insights for percolation decline mitigation as well as occurrence of a public health-relevant compound during MAR using highly purified recycled water.
- Resource Type:
- Masters Thesis
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering
- Creator:
- Ganesan, Rajthilak
- Description:
- Various advances in all the areas of concrete technology have been made which include mixture proportioning, partial replacement of cement, durability requirements, materials, testing, structural designing, and recycling. Nowadays, transportation structures like bridges and pavements are constructed using High-Performance Concrete (HPC). in addition to Ordinary Portland Cement (OPC) mixture, HPC mixtures have been designed which includes binary and ternary mixtures made using Supplementary Cementitious Materials(SCM) like fly ash (Class F and Class (c), ground granulated blast furnace slag (GGBFS), silica fume, metakaolin, and pumice. in this study, the influence of w/c ratio and the influence of the change in aggregate size on concrete's durability are the two different parameters that are under investigation. the concrete mixtures have been designed with w/c ratios of 0.40, 0.44, 0.50. the coarse aggregate sizes used are 3/8 inch, 1/2 inch, and 3/4 inch. All the concrete mixtures were investigated for their fresh and hardened properties. Different types of Non-Destructive Testing instruments were used to determine the bulk and surface electrical resistivity and maturity. in addition, moisture meter was used to identify the influence of ambient temperature on concrete's moisture content during testing. This study demonstrates the benefits of the addition of SCMs in HPC, modifying coarse aggregate size and change in w/c ratio which helps in improving the durability of concrete structures.
- Resource Type:
- Masters Thesis
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering
- Creator:
- Shah, Vandit
- Description:
- Over the last twenty-five years many infrastructure projects have been successfully pursued through the Public-Private Partnership (PPP) approach across the United States (US). While the PPP project delivery model remains the same in principle, the PPP acceptance rate across the different states in the US has been differed significantly. A literature review shows that researchers have identified factors that influence PPP projects at program and project levels but the factors that influence end users’ point of view towards PPPs are not yet identified. This knowledge gap leaves federal agencies with minimal information to adequately plan for PPP success. The main objective of this research is to identify factors that influence public acceptance. Through logical reasoning we selected several demographic and road use factors that could influence end users’ PPP acceptance. The data for all such factors was obtained from several government sources for California, Florida, and Texas. Using SPSS, we conducted Principal Component Analysis (PCA) to identify the most influential factors. Results show that Regional Development, Employment Potential, Congestion, and Vehicle Miles Travelled were the most influential factors affecting PPP acceptance.
- Resource Type:
- Masters Thesis
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering
- Creator:
- Khader, Syed Adnan
- Description:
- Bridges designed to resist earthquake ground-motions are expected to control the vibrations acting through them. These vibrations are to be dissipated during major seismic excitations. This research is focused on the design of a self-centering friction damping brace (SFDB) for the dissipation of such seismic ground-motions. the dissipation is achieved through friction and the super elastic nickel-titanium shape memory alloy wires which are used to gain the self-centering action. the objective of this research is to experimentally evaluate the performance of a SFDB for future research involving the retrofit of the Vincent Thomas Bridge in San Pedro, CA, which experiences large ambient motion. a small scale SFDB was designed, fabricated, and tested by loading the brace cyclically to failure. the results are compared to those of similarly-scaled linear viscous dampers. the force-deformation and energy dissipation characteristics of the SFDB are to be implemented in a model of the Vincent Thomas Bridge to determine its suitability for implementation as a retrofit strategy.
- Resource Type:
- Masters Thesis
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering
- Creator:
- Ibrahim, Suliman
- Description:
- Increased military and industrial activities involving the use of nitroaromatic explosives has led to a renewed focus on their environmental impact on soil, groundwater and surface water. Remediation of wastewater containing 2,4 DNT is critical to prevent its occurrence in environmental matrices and subsequent adverse ecological impacts. in this research, aqueous photodegradation of 2,4 DNT was investigated using a 254 nm UV lamp radiation source, encased in a quartz sleeve and embedded in a continuously stirred reactor. Studies were conducted with and without catalyst and in differing environmental matrices. Cadmium Sulfide in a dispersed form was used and its effect on net degradation of 2,4 DNT in nanopure, filtered and unfiltered natural water studied. Results indicate that, 2,4 DNT in nanopure water has a first-order degradation rate constant of 1.14 hr-1. Filtered and un-filtered river water showed a more rapid degradation rate (approximately two hr-) under similar conditions indicating a catalytic effect of humic and fulvic substances present in natural waters. At higher concentrations (10 mg/l), 95% degradation of 2,4-DNT was achieved in six hours, while similar degradation was achieved in 90 minutes at a concentration of one mg/L (k10 = 0.298 hr-1, k1 = 1.14 hr-1). At lower volumes, similar degradation was achieved in 40 minutes, clearly demonstrating the role of concentration and volume on degradation kinetics (k80 = 5.07 hr-1 >k200 = 4.17 hr-1 >k 800 = 1.14 hr-1).
- Resource Type:
- Masters Thesis
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering
- Creator:
- Ousley, Maria Nassiry
- Description:
- Neonicotinoid insecticides such as Imidacloprid (IMD), Thiamethoxam (THM), and Dinotefuran (DNT) are extensively used in agricultural operations. their occurrence in the environment can have significant adverse ecological consequences to non-target species. in this research, hydrolysis kinetics of these insecticides were investigated at various pHs (acidic, neutral, and basic) and temperature (room temperature [~25°C], 45°C, and 60°C) conditions. Results indicate that of the three neonicotinoids, THM exhibits higher hydrolysis rate across all temperature and pH conditions, followed by IMD and DNT. Both temperature and pH have pronounced effect on the hydrolysis rate. All three neonicotinoids are unstable at pH 11, 60°C, with their hydrolysis rate constants: kTHM = 10.03 hr-1, kIMD = 0.58 hr-1, and kDNT 0.08 hr-1. Slower hydrolysis rate was observed at room temperature with hydrolysis rate constants: kTHM = 0.09 hr-1, kIMD = 0.01 hr-1 and kDNT 5E-04 hr-1. Reduction in temperature and a change in pH induces the largest effect on the hydrolysis rate of the THM. Across all experimental temperature conditions, the hydrolysis rate is fastest at pH 11, followed by pH 7, and stable at pH 4. the difference in the hydrolysis rates for the neonicotinoids tend to shrink as pH changes from alkaline to neutral, with the most unstable compound experiencing the largest effect. the hydrolysis rates clearly demonstrate that these neonicotinoids are stable towards hydrolysis and may pose serious adverse risk to non-target species.
- Resource Type:
- Masters Thesis
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering
- Creator:
- Phonsiri, Vanh
- Description:
- The emergence of different pharmaceuticals and personal care products (PPCPs) in the environment is a concern due to their potential adverse effect on human health and the environment. Among various sources, wastewater discharged from treatment plants often serve as a source of pharmaceutical compounds that pollute soil, surface water and groundwater. in this study, the occurrence of 30 selected PPCPs including analgesics, hormones, anti-epileptics, antilipidemics, anti-hypertensives, antiseptics, and stimulants were monitored in two municipal wastewater treatment plants. between April and October of 2017, total 77 samples were collected over 7 sampling events and analyzed for the presence of various human and animal pharmaceuticals. an optimized EPA Method 1694 utilizing solid phase extraction and liquid chromatographic separation with MS-MS quantitation was used for analyzing raw and secondary treated wastewater samples collected during 7 sampling events. the results show that 28 of the 30 target chemicals were detected throughout various stages of the wastewater treatment process. the concentrations of hormones and other PPCPs ranged from 0.007 to 7.7 µg/L and 0.05 to 126.3 µg/L, respectively. the removal rates of these constituents by trickling filter were varied: 3 analytes were not removed, six had < 50% removals, five had removal between 50 to 70%, and fourteen has removal > 70%. for activated sludge secondary treatment, two compounds were not removed, four had removal < 50%, four had removal 50 to 83%, and nineteen had removal > 90%.
- Resource Type:
- Masters Thesis
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering
- Creator:
- Adhikari, Asish
- Description:
- Damping is defined as the behavior of the building to absorb the input energy. This damping behavior of the building can be improved by adding dampers. The primary goal of this experiment was to assess the impact of installing a liquid-filled tank (either water or oil) on top of a structure subjected to seismic loads. The main criteria used to assess the differences in performance were acceleration and displacement at the top of the structure. Specifically, a 3-story scaled model was used and subjected to a series of different loading protocols (namely pulse, sweep, and earthquake time history loadings) on a shake table. Results indicate that the natural frequency and the maximum roof displacement of the model decreased, while damping ratios increased with the addition of a liquid filled tank. The secondary goal of this study was to see the behavior of the model when wooden slotted bolted friction dampers were added to the system. The model was loaded with the same loading protocols as before and with an additional sine load. Results showed a decrease in the vibration frequency and a significant increase in damping ratio due to the added friction dampers. In conclusion, a building with a liquid tank – water or oil, can provide more damping effect to a building and this may improve the seismic safety of building structures when appropriate volume of the liquid is filled in the tank and is much effective when used with friction dampers.
- Resource Type:
- Dissertation
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering
- Creator:
- Dhital, Smriti
- Description:
- The Mw 7.8 Gorkha earthquake struck central Nepal on April 25, 2015 and brought about a huge loss of life and property. The quake was also responsible for the generation of a large number of landslides. They blocked highways, devastated villages, and temporarily dammed some rivers. About 14,670 landslips were triggered off by the main shock and its numerous large aftershocks. Among the detected failures, about 23% had an area greater than 100 m2. Since such failures can directly affect people’s life and property, they are considered for further investigation in this study. A comparison of these coseismic landslides with the 29 historical failures reveals that these landslides slightly exceed in number from those expected for the peak ground acceleration observed due to these earthquakes. The landslides seem to be concentrated within the area of the fault rupture surface. About 90% of the detected landslips could be classified as earth falls. The areas having relatively soft rocks, such as slates, shales, schists and phyllites of the Lesser Himalaya, suffered from a greater number of failures. The landslides had a strong correlation with the peak ground acceleration and they also showed a positive correlation with some landslide-susceptible geological formations composing the study area.
- Resource Type:
- Masters Thesis
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering
- Creator:
- Sompura, Shiven Jiten
- Description:
- In this research, a study was conducted on the feasibility of replacement of concrete pavements with precast concrete pavements which will result in faster construction, thinner slabs and more durable life of the pavement. It was observed that precast concrete pavement provides longer construction season throughout the year and less congestion in traffic while carrying out maintenance of roads or reconstruction of roads. Furthermore, the main goal of this research is to analyze the Life cycle cost of precast concrete pavements over traditional method; by comparing various aspects such as initial cost comparison of precast concrete pavements over onsite casting, the methodology of construction, the material used, recurring cost, maintenance cost, life assessment and life expectancy. the cost of each parameter will be analyzed, and net present worth method will be utilized to find the current dollar value of both the pavement alternative. Also, a series of range analysis will be carried out with different discount rate, uncertainty cost and initial construction cost which will help us in deciding the range of different parameters in analyzing life cycle cost. Moreover, the results obtained after analyzing all the parameters are that precast concrete pavement is 20% more economical than onsite casting and can be implemented places where congestion is a major concern while carrying any construction activities.
- Resource Type:
- Masters Thesis
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering
- Creator:
- Al-behadili, Mohammed
- Description:
- Undrained shear strength is important in the evaluation of the stability of both natural and man-made slopes. Some researchers have proposed methods such as SHANSEP to evaluate the undrained shear strength of fine grained soils. However, the impact of plasticity characteristics and mineralogical composition on the undrained shear strength has not been widely studied. to do so, the SHANSEP technique was extended to include the interpretation of the normalized undrained strength ratio in this study. to determine the normalized undrained strength ratio, the undrained strength ratio for a sample at any over-consolidation ratio (OCR) is normalized by the value of undrained strength ratio for a normally consolidated sample of the same soil. This study will also focus on calculating the true friction angle and the true cohesion of various mixtures. in this study, five mixtures of montmorillonite with quartz and three mixtures of kaolinite with quartz were used. Unique relationships dependent on the mineralogical composition were developed between the normalized undrained strength ratio with the OCR. the results also showed that the true friction angle decreases with an increase in plasticity index for soils with plasticity indices less than 60% and liquid limit in soils with liquid limits less than 125%, beyond which there are negligible changes in the true friction angle. the base friction angle increases with an increase in plasticity index and liquid limit in soils with kaolinite as the clay mineral, but does not change significantly in soils with montmorillonite as the clay mineral.
- Resource Type:
- Masters Thesis
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering
- Creator:
- Ali, Bezait Gashachew
- Description:
- An analysis of green roof water quality was done to answer this question: does the use of green roofs reduce or contribute to storm water pollution? Green Roofs can increase the overall water retention of an urban area and lower the volume of expected stormwater runoff. a Green Roof (GR) prototype was used to compare the runoff contamination level with a Non- Green Roof (NGR) system. Two tests were performed: The first one using rainwater samples collected over a span of three months and the second from a synthetic rainwater sample created in a laboratory. the sample set using rainwater source had a significant increase of Phosphate and a small decrease in Nitrate concentration within the GR system compared to the NGR system. the sample set of synthetic rainwater source had a larger reduction of Nitrate compared to the accumulation of Phosphate. the experiment also includes a peak flow calculation of GR and NGR systems within a study area in the City of Fullerton. GR and NGR systems were simulated using a hydrologic modeling software, Storm Water Management Model (SWMM). a 25%GR, 50%GR, and 60%GR runoff was compared to the NGR. All three GR systems helped reduced the runoff flow and depth. Furthermore, the proposed conditions were significantly effective in decreasing max flow, max full flow, and max full depth. Both rain water samples and synthetic rain samples show that GR system can improve water quality by decreasing nitrate concentration compared to the NGR system.
- Resource Type:
- Masters Thesis
- Identifier:
- 9780438055926
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering
- Creator:
- Kurwadkar, Sudarshan
- Description:
- Dioxin – Environmental Fate and Health/Ecological Consequences offers a unique, and comprehensive coverage of dioxins and their congeners once they are released to the environment. The book provides readers with a systematic understanding of past and emerging sources of dioxins, current dioxins inventories and historical trends, fate and long-range transboundary atmospheric transport, human health, and ecological risk and regulatory perspective. Providing an excellent analysis of dioxin exposure through the food chain and impact on human health, it also documents the environmental implications of dioxins on ecological flora and fauna. The book offers readers a holistic understanding about dioxins, their atmospheric fate and transport, distribution in various environmental matrices and various routes and exposure pathways through which human beings are exposed to this persistent organic pollutant. It further offers an insight into the toxicological profile and mechanistic analysis of the onset of cancer, remediation technologies, and existing regulatory framework to deal with the problems associated with dioxins. The book will serve as an excellent resource to environmental professionals, particularly environmental toxicologists, environmental health professionals, remediation engineers, environmental regulatory agencies, policymakers, and environmental law professionals.
- Resource Type:
- Book
- Identifier:
- 9781138047242
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering
- Creator:
- Kuo, Jeff
- Description:
- A concise yet comprehensive book that can be read and used from cover to cover, presenting topics that are fundamental for environmental engineering students, engineers, and professionals in the fields of air pollution control engineering and management. Air Pollution Control Engineering for Environmental Engineers covers topics including regulatory approaches to managing air pollution, emissions calculations, and control technologies for various air pollutants. This textbook also presents practical and contemporary issues, such as fugitive component leak detection and repair (LDAR). Subjects in the specifications of Fundamentals of Engineering (FE) and Professional Engineering (PE) exams are embedded in this book. Filled with real-world engineering design and calculation examples, the reader's understanding and common sense needed for air pollution control and management will be enhanced.
- Resource Type:
- Book
- Identifier:
- 9781138032040
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering
- Creator:
- Abdulkarim, Muslim A.
- Description:
- The behavior of civil structures, such as buildings and bridges, subjected to earthquake shaking is highly dependent on structural components which resist the lateral forces that result from ground acceleration. Modern seismic design strategies commonly utilize specially designed lateral components or details intended to yield or break under excessive accumulated force so as to protect the primary vertical structural system. Buckling-restrained braces (BRBs) are one popular type of seismic structural fuse that function by yielding a steel core in both tension and compression, since buckling of the core is restrained. the use of BRBs is popular in buildings due in part to their simple installation, ability to achieve large values of accumulated ductility while dissipating large amounts of energy, and a well-established design procedure including required prequalifying testing. However, there are no standard recommendations or guidelines for the design of BRB systems as seismic resisting elements for bridges. Further, there are no prequalifying loading protocols for demands on BRBs implemented on common bridge types. This thesis advances the standardization of procedures for implementing BRBs on bridges through the development of prequalifying testing protocols for steel truss bridges.
- Resource Type:
- Masters Thesis
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering
- Creator:
- Al Jasar, Ahmed
- Description:
- Studies on using high strength steel as flexural and shear reinforcement in reinforced concrete members are limited in the literature. Thus, current ACI 318 provisions do not permit using reinforcement steel with a strength higher than 80 ksi as flexural or 60 ksi as shear reinforcement. Reinforcement with a strength of 100 ksi is allowed for confinement in special seismic applications. This research has two objectives. First, it examined the effect of using high strength steel (HSS) as flexural reinforcement in RC flat plates on punching shear resistance. Second, it investigated the feasibility of using the HSS as shear reinforcement to increase the punching shear capacity of RC flat plates. To accomplish these objectives, five half-scale RC flat plates were tested under monotonic loading. the experimental program consisted of one flat plate reinforced with 60 ksi as main reinforcement and has 60 ksi shear reinforcement, and four flat plates reinforced with 100 ksi as main reinforcement and have 0, 60, 80, and 100 ksi shear reinforcement in the form of hoops. the results show that replacement of conventional reinforcement steel (Grade 60) with high-strength steel for the flexural reinforcement increased the punching shear capacity by 6%. Also providing shear reinforcement with yield strengths of 60, 80 and 100 ksi increased the punching shear resistance by 7%, 11%, and 16% respectively. Conclusions were drawn based on the load-deflection relation and the strain distributions between the RC flat plates.
- Resource Type:
- Masters Thesis
- Identifier:
- 9780438379770
- Campus Tesim:
- Fullerton
- Department:
- Department of Civil and Environmental Engineering