Search Constraints

Filtering by: Campus Maritime Remove constraint Campus: Maritime Degree Level Undergraduate Remove constraint Degree Level: Undergraduate

Search Results

  • Vx021j128?file=thumbnail
    Capstone project
    Owens, Kenon
    I designed, built, tested, and presented a "Flat-Bed Plotter." I designed a computer program that allows an operator to either draw a picture, or have a picture randomly drawn which may then be edited to his liking. The picture can have either lines, . . .
  • Ff365761h?file=thumbnail
    Capstone project
    Wainscott, Jeff
    A good teaching aid can provide an invaluable resource for a teacher attempting to introduce a new subject to a young class eager to learn. To this end a lab has been created that will aid the teacher in showing new students about solar heat gain, and . . .
  • S7526g28p?file=thumbnail
    Capstone project
    Lind, Jeff
    At present there is a limited amount of playground equipment for handicapped people, and most of the items are boring. The goal of this project was to design a playground slide to be used specifically by people (children and adults) who are wheelchair . . .
  • R207ts15c?file=thumbnail
    Capstone project
    Murray, William A.
    Increasing cost of electrical power has led to an increased interest in the way structures are cooled. In air conditioning, a large amount of heat has to be removed from a space. Previously this has been by using a vapor compression refrigeration cycl . . .
  • 6682x6866?file=thumbnail
    Capstone project
    Howland, Heathcliff
    To assess a pre-combustion chamber (PCC) design using thermal stress and fatigue life analysis. The pre-chamber design was designed as a retrofit application to the Nordberg FSE-1316 Supairthermal series engines. These engines are operated by the Tran . . .
  • 2n49t452r?file=thumbnail
    Capstone project
    Lim, Edward
    The objective of the project was to check the feasibility of using finite-element models in the design of cast stainless steel pump parts. A finite-element model of a centrifugal pump bracket (Price Pump Company part number 4010) intended to be used t . . .
  • 3197xp82b?file=thumbnail
    Heng, Khieng
    Expenses for electricity have increased steadily for years. The old electric resistance heater consumed large amount of energy. The heated air is not distribute evenly throughout the building. These cost increases can be reduced through the use of he . . .
  • Dn39x4275?file=thumbnail
    Capstone project
    Luong, Chau
    The vibration demonstrator was intended to be used as a desk top demonstration device. The Supporting Structure was built from aluminum. Aluminum was not only chosen for its strength and light weight, but it was also chosen because it was an easy met . . .
  • 1j92gb47q?file=thumbnail
    Capstone project
    Muller, Michael J.
    The purpose of this project was to design and build a laboratory apparatus which would permit the measurement of velocity profiles in boundary layer flow. Boundary layer flow is one particular type of external flow (as opposed to an internal flow) tha . . .
  • B2773z31g?file=thumbnail
    Capstone project
    Koral, Arthur, I.
    As future engineers it is important that we understand the fundamental principles of fluid flow so we can design and operate power plants, refrigeration plants, propulsion plants, and any other system that uses the energy of fluid. We must be able to . . .