Search Constraints

Filtering by: Campus Sacramento Remove constraint Campus: Sacramento Department Electrical and Electronic Engineering Remove constraint Department: Electrical and Electronic Engineering Resource type Project Remove constraint Resource type: Project

Search Results

  • Zk51vh227?file=thumbnail
    Project
    Onovakpuri, Ogheneruno
    Increased penetration levels of Distributed Generation (DG) can cause harmful harmonics and power quality issues for the power distribution system. This project aims to investigate harmonic and power quality issues related to high penetration levels o . . .
  • G158bh638?file=thumbnail
    Project
    Anand, Brannon
    Statement of Problem: Today all of our residential and commercial properties use AC power for all of our electrical needs, but as our electronics have been advancing our method to supply power has not changed for over a century. AC power has proven to . . .
  • N009w264b?file=thumbnail
    Project
    Galvez, Angela Marie
    Dual-slope analog-to-digital converters (ADCs) are known for their high accuracy, but slow conversion times. The objective of this project was to design a 12-bit dual-slope analog-to-digital converter in a 0.5 µm CMOS process which rejects 60 Hz noise . . .
  • 2r36tx861?file=thumbnail
    Project
    Burlingame, Jessica Christine
    Arc Flash causes serious damage to life and equipment. Several new techniques have been created to help reduce the risks associated with Arc Flash. Most commonly used and trusted method by the industry is a study that uses electrical system characteri . . .
  • W3763714z?file=thumbnail
    Project
    Taiwo, Adewunmi Oluwademilade
    Statement of Problem: Permissive Overreaching Transfer Trip (POTT) is a scheme that enables fast tripping of breakers at the local and remote end of a protected equipment. POTT schemes are typically used for high voltage line protection against faults . . .
  • 6682x4341?file=thumbnail
    Project
    Sidhu, Harpreet
    Optics usually refers to the behavior of visible, infrared, or ultraviolet light. In mathematics, triangulation, is based on the relations of the angles and sides of a triangle. This project is using both of these concepts for distance estimation. Und . . .
  • Bz60cw54g?file=thumbnail
    Project
    Carmi, Eric
    It is common for the frequency response of a loudspeaker to be characterized at a single point directly in front of the speaker. A loudspeaker’s frequency response depends on the spatial position of the microphone, and being able to obtain the frequen . . .
  • 8w32r5994?file=thumbnail
    Project
    Frost, Brian Scott
    Learning how to barbeque can be an intimidating and a difficult process, taking years to master, leaving novice cooks disappointed with burnt uncooked meat. Today, there are PID (Proportional Integral Derivative) controllers that allow novice cooks to . . .
  • Ht24wj77b?file=thumbnail
    Project
    Van Meter, Christopher William
    This report describes the operation, design, and simulation of a comparator and an integrator for a Dynamic Offset Test Bench (DOTB) in 0.18µm CMOS. The DOTB is used to accurately measure the effective input offset voltage for a high-speed latching co . . .
  • D791sg64c?file=thumbnail
    Project
    Ilori, Adedamola
    Solar generation is the generation and manipulation of solar energy, through photovoltaic cells in solar panels. The use of photovoltaic solar panels is usually the most efficient way of storing the energy. The energy that is stored in photovoltaic pa . . .
  • 4m90dv910?file=thumbnail
    Project
    Bandri Anand, Kiran
    Smart Devices and the need for intelligent systems has brought about a revolution in Technology. With devices getting smaller, yet more effective, there is a constant need for research and development of smart system designs. One such entity that has . . .
  • 08612n93k?file=thumbnail
    Project
    Mohan, Aman
    Robotics is a topic of curiosity among students and technology enthusiasts around the world. In recent times with the introduction of more complicated systems and designs, robotics has taken a great leap forward in various industries and among technol . . .
  • 8623hz10x?file=thumbnail
    Project
    Shailendra, Greeshma
    Camera calibration which is also described as camera re-sectioning, involves approximation of various parameters between the lens and the image sensor of a camera. These variables serve different purposes, which include removal of lens distorsion, est . . .
  • 5h73pw49m?file=thumbnail
    Project
    Saxena, Ankita
    With the advancement in technology these days, we need our work to be done in a faster and efficient way, especially in the areas of telecommunication and VLSI technologies. We need our problems to be rapidly resolved. Hence, in the world of computing . . .
  • 3x816n02f?file=thumbnail
    Project
    Li, Jiaoyue
    One of the most crucial parameters for traffic measurement is vehicle classification. Currently, several different methods for analyzing and interpreting vehicle classification exist: magnetics, magnetometer sensors and inductive loops [1] are just a . . .
  • Jm214p62z?file=thumbnail
    Project
    Bhaskara, Prem Savitra
    Recent changes in computation and storage have led to the tremendous growth of neural networks and big data. Analysis of big data has led to achievements such as self-driving cars through advances in algorithms like machine vision. There is a growing . . .
  • 4j03d008x?file=thumbnail
    Project
    Saejao, Ou
    Communication is important in society and antennas are needed to communicate effectively across large distances. Currently, the demands of transferring more data at a faster rate and over vast distances require new technology. One new proposed technol . . .
  • Tm70mv43v?file=thumbnail
    Project
    Singh, Sharanjeet
    In this project the design of a simple ring oscillator VCO was explored. This new proposed ring oscillator uses inverter delay cells including transmission gates, in order to turn off one transistor in the next delay cell before the other transistor t . . .
  • Work
    Project
    Silva, William
    Current Mode Logic buffers are based on the MOS differential amplifier circuit. Since CML buffers utilize a differential circuit topology, they are less vulnerable to common-mode noise than standard CMOS buffers. CML buffers are able to operate in hig . . .
  • Work
    Project
    Liao, Zhongchao
    The conventional diffraction limit defines a finite range of spatial frequencies that can be transmitted through a microscope. To reveal more information about the objects that are observed by microscope, techniques that can go beyond this limit need . . .
  • Work
    Project
    Kravchuk, Lyubov
    During recent years, there has been a trend of increasing renewable generation desiring to interconnect to the electrical power grid around the world. While renewable interconnections, such as wind, solar, biomass or geothermal, are favorable for the . . .
  • Work
    Project
    Bhalodia, Jay Maheshkumar
    The goal of this project is to design and implement FPGA design of Daubechies lifting scheme for audio compression and reconstruction. The design approach is to use top down hierarchical design. The algorithm implemented performs compression and recon . . .
  • Work
    Project
    Gohil, Naikur Bharatkumar
    In last couple of decades, the number of vehicles has increased drastically. With this increase, it is becoming difficult to keep track of each vehicle for purpose of law enforcement and traffic management. License Plate Recognition is used increasing . . .
  • Work
    Project
    Modini, Santosh Babu
    This project will focus on the application of an advanced electromagnetic simulation software: 4nec2 for the near-field characterization of a 3-element X-band array of waveguide and horn antennas. Previous modeling efforts have shown a significant dif . . .
  • Work
    Project
    Bhatt, Pratik R.
    Audio coder using perceptual linear predictive coding is a new technique for compressing and decompressing audio signal. This technique codes only the information of an audio signal, which is audible to the human ear, all other information is discarde . . .
  • Work
    Project
    Kapadia, Pramod S.
    License Plate Recognition or LPR is an image-processing technology used to identify vehicles by their license plates. This technology is used in various applications involving security, traffic, law enforcement, public safety and transportation sector . . .
  • Work
    Project
    Kapadia, Sumit
    This project report introduces artificial intelligence based algorithm for classifying fault type and determining fault location on the power system, which can be implemented on a Microprocessor based relay. This new concept relies on a principle of p . . .
  • Work
    Project
    Patel, Chintankumar Amrutlal
    GSM automation and control has always been interesting and challenging area for me. After searching for adequate amount of time, I found a demanding project in the GSM automation and data logger designing. The aim of this project is to design a data l . . .
  • Work
    Project
    Patel, Maunank V.
    As we know our each day to day activity requires electricity, starting from waking up by alarm to using cell phone and computer at work till watching our daily night shows on television, and that comes from the power generation plants, usually called . . .
  • Work
    Project
    Syed, Abdul Muqeet
    This project will focus on the thermometric calibration of the heating effects by the 27.12 MHz Mettler Diathermy system on non-hardening clay with digital thermometer of plastic probe for use in Hyperthermia system for the treatment of cancer. The no . . .
  • Work
    Project
    Raval, Pinak
    This report will present steps taken in order to develop a “Platform Readiness Test Plan”. The platform readiness test plan will provide assistance to the original equipment manufacturers (OEM) in testing and validating their motherboard robustness pr . . .
  • Work
    Project
    Shah, Saurin
    The major concern of the world at this time is the growing rate of energy consumption and the resulting act of increasing pollution. We are living in an era where it is not possible to stop the growth or decrease the use of energy, whether it relates . . .
  • Work
    Project
    Shrotriya, Adya
    This project develops a method for path planning and tracking of a moving target by a wheeled robot. The main kinematics variables updated in each step are the orientation and relative position of the robot and the target. A discrete extended Kalman f . . .
  • Work
    Project
    Patel, Dhaval
    To design a circuit that measures and controls the pressure of the generated steam to the required level. Also, that keeps track of sun path to get maximum exposure of sunlight and thus getting optimum energy level from solar radiation. This system ha . . .
  • Work
    Project
    Kamat, Preeti
    Design and validation of NTRU public-key cryptosystem is a relatively new Public Key Cryptosystem. Public Key Cryptography or Asymmetric Cryptography is used in areas of digital signatures and key exchange. RSA is an acclaimed Public Key cryptosystem . . .
  • Work
    Project
    Cherukuri, Krishna Ramya
    This report details the different stages of the recently initiated Phase I clinical trial of a new modality of cancer treatment in India. The clinical trial involves the addition of hyperthermia or heat treatment to existing treatment techniques such . . .
  • Work
    Project
    Beeram, Navaneeth Kumar
    The main objective of this project is to analyze nonlinear effects in optical fiber and to discuss how these effects cause dispersion in input signals. This project also discusses the pros and cons of nonlinear dispersion. Nonlinear dispersion may be . . .
  • Work
    Project
    Hoffman, Charles John
    The purpose of this project is to gather and document the existing criteria, rules, and practices used by the Investor Owned Utilities (IOUs) in California for physical interconnection of Distributed Generation (DG) and to identify existing technical . . .
  • Work
    Project
    Tang, Jizhen
    The object of the project is to design, simulate and fabricate a broadband microstrip balun operating at a center frequency of 5 GHz and wide bandwidth of 3.5 GHz. In this project report, I present one design with the capacitor in the middle of couple . . .
  • Work
    Project
    Enan, Wael Essam
    This project focuses on a physiotherapy technique in which a therapist uses the thumbs to apply force to the spinal column of a patient. A therapy session consists of a series of bouts. Because the thumbs tire quickly, the bouts usually are short, abo . . .
  • Work
    Project
    Shukla, Chhaya B.
    The increased use of nonlinear electronic equipment has become a concern in most utility power systems. Nonlinear loads draw current discontinuously during the cycle of the input voltage waveform and produce low power factors when harmonics are taken . . .
  • Work
    Project
    Korrapati, Srinivasulu
    The purpose of this project was to optimize the bonding parameters to develop an adhesive wafer bonding process that produces a defect free and relatively strong bond using SU-8 as an intermediate adhesive layer at the lowest possible processing tempe . . .
  • Work
    Project
    Jerome-Surendran, Thomas D.
    The focus of this project is to carry out an accurate simulation study of a 3- element array of rectangle horn antennas forming a focused near field beam. This study has useful application for clinical hyperthermia which is the therapeutic treatment o . . .
  • Work
    Project
    Amin, Nuruddin
    This project focuses on the experimental study of 3-element linear antenna array operating in the X-band frequency range of 8-12 GHz. The main application of the array design is in microwave hyperthermia treatment of tumors by focused radiation. Typic . . .
  • Work
    Project
    Yerramilli, Surya
    In this modern age the power system is becoming increasingly large and much more complicated in its operation. Maintaining synchronism between various parts of power system is becoming cumbersome process, which arises stability problems in power syste . . .
  • Work
    Project
    Thouta, Santosh Kumar
    The main objective of this project is to design a synthesizer that can convert mono audio signal into stereo audio signal. This synthesizer proves to be a handy hardware that allows enjoying stereo quality even though the source of the audio is mono. . . .
  • Work
    Project
    Jasoliya, Jaymin
    Image compression is getting more and more important in the electronic world with increased amount of bandwidth and storage requirement with increase in the image and video usage over internet. Pioneering advances in the image compression algorithms a . . .
  • Work
    Project
    Benjamin, Joseph Antony
    GPS has become a common household item for various purposes, the most obvious one being navigation. It is also used for other purposes and leisurely activities such as running, biking, skating, skiing and even swimming. This project uses a GPS receive . . .
  • Work
    Project
    Raval, Shailja
    This project is about generation of power through the solar panels in Californian highways and storing it in a storage system. The plan is to build up charging stations for electric vehicles on highways and this stored form of energy can be used in th . . .
  • Work
    Project
    Kaur, Harpreet
    This paper provides a detailed study on the algorithms used by an ALU to perform multiplication and division for large numbers, and recommends one algorithm that will give best performance for division and multiplication. The multiplication algorithms . . .