Electrocardiograph (ECG) recorders are medical devices used to measure and record electrical signals generated by the activity of the heart in the human body. Doctors use the data from an ECG to detect signs of cardiac disease in a patient. The input . . .

Stereo vision systems imitate the mechanisms of natural human vision to get threedimension information from captured scenes. It is applied in the control of autonomous robots (to build a map of the environment) and the control of production tools. Ste . . .

The quality of power is the major challenging issue in the power system. In real-world power systems, it is ordinarily impossible to maintain perfect balance in phase voltages and currents. The variety of the loads in the networks enhances the amount . . .

A dynamic service restoration (DSR) method based on load curve variations, is proposed in this project. The application of the time variable load is considered to make an effective service restoration plan for affected distribution systems. Based on t . . .

Power transformers in a utility grid are expected to work without failure under a wide variety of circumstances, such as times of power system instability, extreme weather conditions, and electrical faults. Because of the extremely high up-front cost . . .

The digital loop filter for an all-digital phase-locked loop was designed to meet a given set of specifications, and the performance of the filter was verified using MATLAB simulations. The number of bits used to represent each coefficients was select . . .

With rapid growth of electrical vehicles accessed to grid, EVs charging is considered to be a crucial part of demand side flexibility in future smart grid. Uncoordinated charging of EVs in a high-penetration system can increase peak load and create ne . . .

Energy is a vital component for human economic development and growth. The extensive use of fossil fuels has damaged our living environment. Consequently, the world has turned its attention to renewable energy sources. Among them, solar energy has att . . .

This project work is focused on the study and possible resolution of interface issues between the Texas Instruments TMS C6713 DSP Starter Kit (DSK) and computers operating on Windows versions higher than XP, such as Windows 7, 8 and 10. Essentially, t . . .

The purpose of this article is to evaluate techniques used in modern power systems to reduce arc flash incident energy on station service with voltage level of 480 volt, main and feeder Low Voltage Power Circuit Breakers. The paper will analyze the cu . . .

To reduce emissions of harmful substances in the environment, the current trend in power generation is based on utilization of environmentally-friendly resources such as wind farms and photovoltaic power plants. During the last two decades, because of . . .

Today we live in the world which is growing in terms of technology. This technological growth of the world depends on communication. So as a matter of fact, the field of communication is growing by leaps and bounds. Due to technological advancement in . . .

This project provides two methods evaluating the mean life of a group of power system equipment using normal and Weibull distribution only by end-of-life failure data based on paper [1]. The procedure of the methods of normal and Weibull distribution . . .

Conservation voltage reduction (CVR) is an efficient energy saving method and it is becoming popular among electrical utilities. For this project, I plan to model and test a 24.9kV, IEEE 34 distribution system in PSCAD. Firstly, I do the simulation wi . . .

Connectivity verification on a complex and large-scale chip can be a daunting and one of the crucial tasks to ensure the silicon to work on the first attempt of fabrication. Mixed-signal connectivity originates at a digital control bit and terminates . . .

In the project, an impedance model in the range of sub-synchronous frequency has been built to demonstrate an accurate representation of SSCI. All the conclusions associated with the influence of SSCI through parameter changes have been consistent wit . . .

The main purpose of power system reliability assessment is to quantify the reliability level of power system, then function as a guide to system planning and operation. Due to the random behavior of wind power generation and the intermittency associat . . .

There are numerous applications of inclination measurement in medical, electronic, telecommunication, and aerospace fields. The applications include activity monitors, detection of horizon in digital cameras, identification of movement of device head, . . .

Electrical power systems when operated under loaded conditions cause disruption of power system equilibrium and issues related to voltage stability. Often times the electrical power systems are thus exploited leading to the problems with voltage stabi . . .

Robots are the main part of flexible manufacturing systems. They are used in various applications where human work can be replaced and automated. In this project, I have simulated a robotic arm manipulator with six degrees of freedom in MATLAB. There . . .