Search Constraints

Filtering by: Campus Sacramento Remove constraint Campus: Sacramento Department Electrical and Electronic Engineering Remove constraint Department: Electrical and Electronic Engineering

Search Results

  • N009w264b?file=thumbnail
    Project
    Galvez, Angela Marie
    Dual-slope analog-to-digital converters (ADCs) are known for their high accuracy, but slow conversion times. The objective of this project was to design a 12-bit dual-slope analog-to-digital converter in a 0.5 µm CMOS process which rejects 60 Hz noise . . .
  • Work
    Project
    Patel, Dhaval
    To design a circuit that measures and controls the pressure of the generated steam to the required level. Also, that keeps track of sun path to get maximum exposure of sunlight and thus getting optimum energy level from solar radiation. This system ha . . .
  • Work
    Project
    Santamaria, Jorge
    The analysis of Power Systems under fault condition represents one of the most important and complex task in Power Engineering. The studies and detection of these faults is necessary to ensure that the reliability and stability of the power system do . . .
  • Work
    Project
    Tania, Wahida
    Voltage Stability is becoming an increasing source of concern in secure operation of present-day power systems. There is a need to perform studies to ensure that the reliability of the power system is not decreases as a result of unstable voltage. Thi . . .
  • Work
    Project
    Prasannan, Sreepriya
    This project will focus on the design of wideband antenna arrays, which can operate in the 1-22 GHz band. The design process utilizes the principle of providing unequal spacing between adjacent elements of the array, which has the desired effect of si . . .
  • Bg257f18j?file=thumbnail
    Project
    Dresser, Charles William
    A prototype automated radiochemistry system to separate copper and zinc was developed and tested as a proof of concept using off-the-shelf modular pieces. A graphical user interface was developed to provide a manual interface to all modular devices fo . . .
  • Work
    Project
    Breen, Laurence Allen
    In this project, simulations of simple electromagnetic structures have been performed. Inductive loop sensors and ball grid array structures have been analyzed using 3D and 2D full-wave electromagnetic simulators along with scientific calculation soft . . .
  • Vx021f146?file=thumbnail
    Project
    Shanks, Anthony
    Using electrodes to read electrical signals from the human body and display them on an oscilloscope requires an analog front end to properly capture, amplify, and digitize the voltage levels from the electrodes. The first stage of the analog front end . . .
  • Work
    Project
    Liu, Hongliang
    In this project, a novel method predicting voltage collapse named Wide-Area Loss Index (WALI) will be tested on IEEE 3-machine 9-bus system and IEEE 10-machine 39-bus system. A region of interest is considered for voltage criteria calculation. The sim . . .
  • W9505047s?file=thumbnail
    Project
    Polanco, Edgar
    The project focuses on the relay protection of two power transformers, a 30MVA and a 40MVA respectively. Specifically, the project focuses on the design and the application of the 51, 50, 50G and 87 protection schemes for the two power transformers. T . . .